The shampoo fits upright, but you have to take it out to press the pump. You can spot this small annoyance before work starts. Begin your niche design with the bottles you expect to keep there once the wall is tiled.
01
Leave room for your hand
Line up the products in a box open at the front. Press the tallest pump, reach for the bottle at the back and put it back. Move the lid up and down until your hand has enough clearance.
02
Specify the finished opening
Tell the tiler the inside width, height and depth you want. With a ready-to-tile niche such as Schlüter-KERDI-BOARD-N, ask what space the tile, adhesive and any shelf will leave once everything is in place.
03
Choose the wall from inside the shower
Hold the mock-up against the wall and reach for a bottle from your usual position. Try two locations and compare the reach, where the spray lands and how the moving shower screen passes.
04
Fit the niche into the tile layout
Mark the niche, grout lines and shower controls on an elevation of the wall. Ask the trades involved to confirm the space behind the partition and how the niche will connect to the waterproofing system.
Before you decide
- Press the pump in position.
- Record all three finished dimensions.
- Confirm the location on the wall drawing.
The essentials
Your questions, our guidance.
Would an intermediate shelf help?
It can separate small jars from tall bottles if there is still enough space above each pump to press it.
From idea to project
Discover at EDIFIS
Understand waterproofing in a tiled showerPlan a layout for large-format tilesConfirm references, configurations, finishes and availability for your project.
Documentation & references
EDIFIS design advice. For specifications and installation, consult the documentation for the selected reference.
Schlüter-Systems · KERDI-BOARD-N shower niche ↗



