The flush in room 214 needs attention. With the room number alone, the team should be able to find out which cistern is fitted, even when its flush plate looks like every other one on the floor. A short record checked on site gives them a starting point.
01
Record what was fitted
After installation, note the brand, model, finish and full product code. Give the flush plate and the cistern separate entries. If a substitution was approved on site, enter the code actually fitted and keep a record of the change.
02
Take two photos for each entry
Keep a wide shot showing the position of the fitting, then a clear close-up of the label. For a concealed item, take the photos before the wall is closed and use the room number in the filenames.
03
Point the team to the spare part
Add links to the manual and the parts list for that model. Geberit Pro provides access to product codes and manuals. Record the confirmed replacement part number or mark the field as pending verification.
04
Keep a record after each intervention
Enter the date, the old and new codes and the reason for the change. Give the record handed to the operator a revision number.
Before you decide
- Link every fitting to a room.
- Photograph the label before it is covered.
- Date the latest change.
The essentials
Your questions, our guidance.
Can identical rooms share one record?
A standard record can serve as a starting point. Link it to the relevant room numbers and record an exception as soon as a part or finish differs.
From idea to project
Discover at EDIFIS
Identify an older Geberit cisternPrepare photos and product codes for a service requestConfirm references, configurations, finishes and availability for your project.
Documentation & references
EDIFIS design advice. For specifications and installation, consult the documentation for the selected reference.
Geberit · identifying products and spare parts with Geberit Pro ↗


