A six-minute shower can mean six minutes of running water or six minutes in the enclosure. To compare consumption from one day to the next, measure the flow and the time the water runs separately.
01
Measure the spray you use
Choose a graduated container wide enough to catch the whole spray. Set the shower as you normally would. Once the flow is steady, collect the water for thirty seconds. Double the litres collected to get litres per minute.
02
Turn flow into volume
If you collect 4 litres in 30 seconds, the measured flow is 8 litres per minute. At that setting, 6 minutes of running water uses about 48 litres. Deduct any time when the shower was turned off.
03
Change one thing at a time
Try the second spray for the same duration without changing how far the mixer is open. Note the result and how it feels. To compare two habits, keep the same spray and time only the running water.
04
Work out the household total
In this example, turning the water off for 2 minutes saves around 16 litres per shower. For a weekly estimate, multiply that difference by the number of showers taken under the same conditions.
Before you decide
- Catch the entire spray.
- Time the running water.
- Keep settings consistent for a comparison.
The essentials
Your questions, our guidance.
Will I get the same flow as the catalogue figure?
The data sheet gives the conditions of the manufacturer’s test. Your reading reflects your own installation and how far you open the mixer.
From idea to project
Discover at EDIFIS
Compare the flow rates on hansgrohe data sheetsUnderstand the difference between pressure and flowConfirm references, configurations, finishes and availability for your project.
Documentation & references
EDIFIS design advice. For specifications and installation, consult the documentation for the selected reference.
écoconso · measuring shower water consumption ↗



