On a plan, a hand shower tucked behind the spout looks discreet. When you sit in the bath, can you pick it up and put it back with one hand? A full-size paper template lets you try several layouts before any holes are drilled.
01
Arrange the fittings on the rim
Draw the outline of the usable deck. Cut paper discs to the size of the spout base, handles and hand shower holder. Some hansgrohe sets with a hand shower use three holes, others use four.
02
Try the movements from the bath
Place the template on the rim. Act out turning on the water and picking up the hand shower. Consider where you sit, which side the wall is on and where the stream will land.
03
Draw what sits underneath
Ask for a section drawing showing the concealed body and the route of the hose. On models fitted with an sBox, the hose retracts into a box under the rim. Allow space for the box behind the bath panel.
04
Confirm the layout before drilling
Ask the installer to check the rim, the manufacturer's drilling template and the planned service access. Keep the references for the exposed and concealed parts together.
Before you decide
- Measure the usable area of the rim.
- Test the movements on the template.
- Have the space under the bath checked.
The essentials
Your questions, our guidance.
Does the number of holes define the installation?
It indicates the general arrangement. Hole spacing, diameters and the space required underneath depend on the exact model.
From idea to project
Discover at EDIFIS
Check bath orientation and panel positionPlan access behind the bath panelConfirm references, configurations, finishes and availability for your project.
Documentation & references
EDIFIS design advice. For specifications and installation, consult the documentation for the selected reference.
hansgrohe · Rim-mounted bath and shower mixers ↗



