A bottle standing beside the tap is easy to move. A built-in dispenser fixes the spot your hand will reach for every day. Try it at the sink before the worktop is drilled.
01
Find the natural reach
Stand a pump bottle where you want the dispenser. Hold the sponge as you would to wash a plate. Check where the liquid lands and whether your wrist clears the mixer handle when it is open.
02
Look under the worktop
Directly below your mark, look for the bowl rim, supports and the path of the pull-out spray hose. Allow space for the reservoir and for a hand to reach in and remove it.
03
Try the next refill
The hansgrohe A41 washing-up liquid dispenser, item 40438340, fills from above. If a shelf hangs over the sink, try lifting a pump and tilting your refill bottle beneath it.
04
Give the fabricator the right drawing
This model requires a 28 mm hole and fits worktops up to 55 mm thick. Give the fabricator its data sheet and mark the centre of the hole on the sink template.
Before you decide
- Test the reach with a sponge in hand.
- Check there is room to tip the refill bottle.
- Confirm the diameter on the data sheet.
The essentials
Your questions, our guidance.
Can I use a hole intended for a different accessory?
Before reusing it, have the hole diameter, location and worktop thickness checked against the requirements for your chosen dispenser.
From idea to project
Discover at EDIFIS
Try out kitchen mixer controlsCheck the window swing above the sinkConfirm references, configurations, finishes and availability for your project.
Documentation & references
EDIFIS design advice. For specifications and installation, consult the documentation for the selected reference.
hansgrohe · A41 washing-up liquid dispenser data sheet ↗



